Using WebBrowser (cont.)
Time settings
Click [Detailed set up] | [Adjust clock] in the menu. |
Time zone | : Select the time zone and click [Set |
| time zone]. |
Time | : Enter the current date and time in |
| [Date] and [Time], and then click [Set |
| date and time]. |
Email settings
You can specify two email recipients.
Click [Detailed set up]
• [MAIL SERVER] |
|
ENABLE | : Enable or disable email transmission. |
SMTP SERVER NAME | : Enter the SMTP server name. |
• [MAIL OPTION] |
|
MAIL FROM | : Enter the sender’s email address. |
MEMO | : Enter a description of the sender. |
• [TEMPERATURE WARNING SET UP]
MINIMUM TIME : Enter the interval for sending email.
INPUT AIR TEMPERATURE: Select the temperature of the intake sensor at which to send a warning message.
: Enter the email addresses of the recipients.
: Change the type of message as desired.
When sending messages to mobile phones, select “SIMPLE.”
: Select ON to send email when errors occur.
: Select ON to send email when “at REMAIN” is reached.
INPUT AIR TEMPERATURE: Select ON to send email when the temperature set in [TEMPERATURE WARNING SET UP] is exceeded.
PERIODIC REPORT : Send a message with the projector status at the selected date and time.
When [SUBMIT] is clicked, the settings are applied.
40
