12
The projectors that can be connected are displayed on the <Select Access Port> window.
ヂ Network
When you specify the network number (See page 29) set
on the projector from one of [1], [2], [3], [4], and
[U (USER)] 1, projectors that are presently switched on in
the selected network number are displayed in [Projector
Name]. The initial value for both the computer and the
projector is [1] 2.
1-2 (See page 13)
ッ ID (See page 19)
Display projector’s ID.
ツ Mode (See page 22)
Display projector’s mode or style.
ヅ Available mode and functions
Unavailable modes/functions among [Live mode], [Multi live
mode], and [One shot] are displayed with [ ] overlaid on
them.
テThe number of people connected to this projector
デThe status of this projector
ト[] appears when password entry is needed for
connection.(See page 18)
ド Connection message (See page 14)
Blinks when connection is not possible.
Click to display information on resolving the issue.
ナ Connectability
When you click [Connectability], the projector name
and ID are displayed at top left of the projector screen.
If the projector name and ID are displayed correctly,
the message “Projector is available.” will appear on the
computer screen.
ニ Designate (See page 18)
Designate projectors to be connected when ヂ is set to [U].
ヌ ID Search (See page 19)
When you click [ID Search], a search for the projector of
the specified ID is carried out from among the projectors
that are presently switched on, from all network numbers
other than [U].
Connecting with wireless LAN (cont.)
ド ナ ニ ヌ
ヅ
テ
デ
ト
ヂ
ッ
ツ