Connecting with wireless LAN (cont.)
2 | In [Network], select the same network number as is displayed in the [WIRELESS |
LAN] menu of the projector to connect. | |
| Projectors powered on in the chosen network group are listed. |
3 | Select the desired projectors, and click [OK]. |
[ ] appears in the menu bar and a connection is established with the projector. |
(“Menu description” See page 21)
• Easy Wireless Set Up cannot be made between the projector and the computer. (See page 46)
• Automatic connection setting (See page 26)
※1
•In the following situation, connections other than [U] are not possible. - When not installed in the [Applications] folder
•Depending on the computer and wireless LAN card used, Easy Wireless Set Up may not be possible. If this is the case, the [Network] setting of <Select Access Port> window will be switched to [U] automatically. For details of the connection procedure, first close Wireless Manager ME 4.5, and then refer to page 15.
※2
•The initial network number for both the projector and Wireless Manager ME 4.5 is [1]. These numbers must match for the connection. To check the network number, refer to the network menu of the projector.
•Although WEP (Wired Equivalent Privacy)※ is not set for network number [1], WEP (Wired Equivalent Privacy)※ is set for network numbers [2] through [4], so set [2] through [4] if security is to be emphasized.
•Important image data is protected because AES※ encryption processing takes place in advance for all network numbers, even if [ENCRYPTION] is set to [NONE].
•Other network adapters may not be usable under Easy Wireless Set Up connections.
•Connections to other networks connected through the wireless LAN card are broken under Easy Wireless Set Up connections.
※ “Glossary” (See page 45)
13
