Network setting of the projector (cont.)
Wired LAN settings
You can make detailed wired LAN settings.
Select [WIRED LAN] at the network menu and click the [ENTER] button.
WIRED DETAILED SETUP
RETURN
SELECT 
DHCP | OFF |
| |
IP ADDRESS |
|
|
|
192.168. | 10.100 | ||
SUBNETMASK | 255.255.255. | 0 | |
GATEWAY |
|
|
|
192.168. | 10. | 1 | |
OK CANCEL
DHCP※:
ON : If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired.
OFF : If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP ADDRESS※], [SUBNETMASK※] and [GATEWAY※].
※“Glossary” (See page 44)
A wired LAN and wireless LAN cannot be used in the same segment.
Default wired LAN settings
The following wired LAN settings are set before the projector leaves the factory.
DHCP | : OFF |
IP ADDRESS | : 192.168.10.100 |
SUBNETMASK | : 255.255.255.0 |
GATEWAY | : 192.168.10.1 |
28
