|
|
|
|
| RGB | VIDEO |
|
|
|
|
| + |
|
| 1 | 0 2 |
|
| * |
|
Projector control panel |
|
|
| |||
| # | $ | % & ' |
|
| |
|
| RGB INPUT | LAMP | TEMP | 3 |
|
|
|
|
| INPUT | 4 |
|
| POWER | AUTO SETUP | VIDEO | RGB SHUTTER |
| |
/ |
|
|
| ( | 5 |
|
| STANDBY(R) |
|
|
|
| A |
. | ON(G) |
|
|
|
| |
– FOCUS | + |
|
|
|
| |
|
|
| ALL | SET | ||
- |
|
|
|
| ||
|
|
|
|
|
| |
| – ZOOM | + MENU |
| ENTER |
|
|
, |
|
|
|
|
|
|
+ * )
6
/
&
7
)
*
8
(
9
:
.
;
<
This indicator illuminates red when the MAIN POWER switch is turned on, and illuminates green when the power is turned on and a picture starts to
be projected.When the projector is in “WEB STANDBY” mode, this indicator flashes slowly in red.
$RGB INPUT indicator | (page 27) |
This indicator illuminates when a signal is input into the connector that is | |
| selected with the input select buttons. | |
| %LAMP indicator | (page 55) |
This indicator illuminates when it is time to replace the lamp unit. It flashes if a circuit abnormality is detected.
&INPUT (RGB, VIDEO) buttons (page 25)These buttons are used to select the input signals. When “AUTO SEARCH” in the “OPTION” menu is set to “ON”, the input signal will be detected and selected automatically by pressing this button for a few seconds. (Refer to page 47.)
| 'TEMP indicator | (page 54) |
This indicator illuminates if an abnormally high temperature is detected inside | |
the projector or around it. If the temperature rises above a certain level, the | |
power supply will be turned off automatically and the indicator will flash. | |
| (SHUTTER button | (page 29) |
This button is used to momentarily turn off the picture and sound. | |
| )ENTER button | (page 38) |
This button is used to accept and to activate items selected in the on- screen menus.