FUNC 1

This assigns a function to the FUNC1 button of the remote control unit .

MUTE

Functions in the same way as the “MUTE” function. (page 46)

KEYSTONE

Functions in the same way as when “KEYSTONE” is selected from the “POSITION” menu screen. (page 43)

CONTROL KEY

To disable the buttons on the projector, set “CONTROL KEY” to “OFF”. A confirmation screen will then be displayed. Select “OK” by pressing the I or H button. To use the buttons on the projector, set to “ON” by using the remote control

unit.

AUTO POWER OFF

If no signal is input to the projector for the duration of the period you set, the projector will return to standby mode. The period can be

set from 15 minutes to 60 minutes in 5 minute intervals. If you don’t use this feature, set it to “DISABLE”. This feature will not function when using the “FREEZE” function.

NOTE:

BWhen the projector is connected to a personal computer via a wired LAN, the projector will go into “WEB STANDBY” mode. (page 50)

SET ID

This item is used to set the projector ID number to control two or more projectors either simultaneously or separately.

ALL

1

64

ALL

The projectors can be controlled from any remote control unit regardless of their ID numbers.

1-64

The projector can be controlled from the remote control unit with the same ID number.

NOTE:

B“SET ID” is set to “ALL” by default. Hence ID number

need not be set when only one projector is used.

BIf the projectors are given ID numbers, their remote control units must be assigned the same ID numbers, respectively.

BWhen several projectors are set up together and “SET ID” is set

to “ALL”, none of the projectors can be operated separately

from other projectors, even if they have been set with different ID numbers.

BThe projector cannot be turned on and off from the remote control unit if the “CONTROLLER ID” does not match the projector ID number. For details on setting the projector ID number in the remote control unit, refer to page 23.

Adjustments and settings

E NGLISH

-49