NOTE:
BThe letters which cannot be input will be displayed in gray, and cannot be selected in “CHANGE TEXT”.
LOGO DISPLAYA logo can be displayed before projection.
ON
“LOGO DISPLAY” is enabled.OFF
“LOGO DISPLAY” is disabled.LOGO CLEARCaptured logo data can be cleared. Press the ENTER button to display the confirmation screen, and then select “OK”.
A logo can be captured from the picture being projected. Press the ENTER button to display the capture adjustment screen.
POSITION:[{ } ^ @]
CAPTURE:[ENTER]
CANCEL:[MENU]
Capturing frame |
|
|
| |
#Press the | F G I and | H buttons |
| |
to move the capturing frame to |
|
| ||
the area you want to capture. |
|
| ||
$Press the ENTER button. |
|
| ||
CThe letters “CAPTURE ... | ” and |
| ||
the progress status will be |
|
| ||
| displayed while logo capture is |
| |||
| being carried out. |
| settings | ||
NOTE: |
|
| ||
|
| and | ||
| BThe size of the capturing frame | ||||
Adjustments | ||||
BFine images such as landscapes |
| |||
varies depending on the signals being input.
may be unable to be captured. BOnly RGB signals can be
captured. (Except 480i, 576i, 480p, 576p, 1 080/60i,
1 080/50i and 720/60p. Refer to page 70 for details.)
BImages with 512 x 384 pixels can be captured.
BIt is recommended that you input XGA signals, and set “KEYSTONE” to “0” when carrying out “LOGO CAPTURE”.
E NGLISH |