NOTE:
BYou can also turn off the power by pressing the POWER button twice or by holding it down for at least 0.5 seconds.
BWhen the projector is in standby mode (the power indicator on the projector is illuminated red), the projector continues to draw approximately 11 W of power even when the cooling fan has stopped.
BWhen the projector is in “WEB STANDBY” mode, the cooling fan operates and the power indicator on the projector flashes slowly in red and the projector continues to draw approximately 40 W of power. (page 50)
Power indicator
Power indicator status | Projector status | ||
| Illuminated | The projector is in standby mode and image projection | |
| is possible by pressing the POWER button. | ||
|
| ||
| Red |
|
| |
Flashing | The projector is in “WEB STANDBY” mode, and can be | ||
| controlled with personal computers via a wired LAN. | ||
| slowly | ||
| (The cooling fan is operating.) | ||
|
| ||
|
|
| |
|
| The projector is preparing for projection after the | |
| Flashing | power is turned on while the power indicator is | |
| Green | illuminated red. (After a short period, a picture will be | ||
| |||
|
| projected.) | |
|
|
| |
| Illuminated | A picture is being projected. | |
| Illuminated | The lamp is cooling down after the power is turned | |
| off. (The cooling fan is operating.) | ||
|
| ||
|
|
| |
| Orange |
| The projector is preparing for projection after the | |
| power is turned on while the power indicator is | ||
| Flashing | ||
| illuminated orange. (After a short period, a picture | ||
|
| ||
|
| will be projected.) | |
| RGB INPUT indicator |
| ||
|
| ||
RGB INPUT indicator status | Projector status | ||
| Illuminated during | A signal is being input to one of the RGB1 IN, RGB2 | ||
standby mode |
| IN or RGB3 IN connectors. | |
|
| ||
Illuminated during | A signal is being input to the connector selected | ||
projection |
| using the input select buttons. | |
|
|
| |
Basic Operation
E NGLISH |