(S-VIDEO/VIDEO only)
AUTO
NTSC
NTSC4.43
PAL
PAL-M
PAL-N
SECAM
This should normally be set to “AUTO”. If the signal is of such poor quality that the correct format
cannot be automatically distinguished, change the setting manually to the required TV system.
NOTE:
BWhen set to “AUTO”, the projector automatically distinguishes between
NTSC/NTSC 4.43/PAL/PAL60/
Projecting sRGB- compatible pictures
sRGB is an international color reproduction standard
1)established by the International Electrotechnical Commission (IEC).
If you would like the colors in sRGB- compatible pictures to be
reproduced more faithfully, make the following settings.
#Press the F or G button to select “PICTURE MODE”, and
then press the I or H button to select “NATURAL”.
$Press the F or G button to select “COLOR TEMP.”, and
then press the I or H button to select “STANDARD”.
%Press the STD (standard) button on the remote control unit.
&Press the F or G button to select “LAMP POWER” in the “OPTION” menu, and then
press the I or H button to select “HIGH”.
NOTE:
BsRGB is only enabled when RGB signals are being input.
Adjustments and settings
E NGLISH |