Correcting the image position

automatically

(AUTO SETUP)

The position of the projected image can be corrected automatically in accordance with the input signal.

Press the AUTO SETUP button.(When the edges of the projected image are not visible)

A

ALLSET

BAutomatic positioning

[

will be carried out.

 

Projector control panel

INPUT

AUTO SETUP

VIDEO

RGB

SHUTTER

NOTE:

B“AUTO SETUP” does not function when DVI signals are being input.

BWhen RGB signals are being input, “DOT CLOCK”, and “CLOCK PHASE” will be adjusted automatically in addition to the position of the image being corrected (except when the dot clock frequency is 108 MHz or higher). Refer to page 43 for details.

BIf the edges of the projected image are indistinct, or if a dark picture is being projected, the automatic setup processing may stop automatically before it is complete. If this happens, project a different picture and then press the AUTO SETUP button again.

28-ENGLISH