Connection
Connecting to an amplifier (stereo equipment)
Terminals (LINE OUT FOR AUDIO AMPLIFIER)
Connect these terminals to the AUX input of a stereo amplifier to listen to the stereo sound through the amplifier.
Connection |
| Operation | |
Connecting to a videocassette recorder (VCR) | |||
To connect to a videocassette recorder proceed as follows: | |||
1. | Connect the external equipment, as | Observation: | |
| show in the illustration, to the terminals | ||
| labeled “ENT” (input). | If the VCR is connected to the AV input | |
|
| ||
2. | Select the video mode by pressing the | terminals, press the TV/VIDEO button on |
|
Obs.: The terminals labeled “P/ AMPLIF. DE AUDIO” (to the amplifier) cannot be connected to external loudspeakers.
Connect a sound amplifier to the terminals “P/ AMPLIF. DE AUDIO” on the TV set, as shown in the illustration below, and follow the steps 1 through 4.
1.Set the amplifier volume to minimum.
2.Set the TV sound volume between 10 and 15.
3.Adjust the sound volume of the amplifier to the desired level.
4.The sound level and the function MUTE may be accessed from the remote control unit.
“TV/VIDEO” button on the TV set. | the TV set to display the VCR output on | Guide | |
3. Turn on the connected VCR or video | the screen. | ||
If the VCR is connected to the VHF/UHF | |||
disc player according to instructions in | |||
| |||
terminals, to display the VCR output, select |
| ||
their respective manuals. |
| ||
| on the TV set the channel corresponding |
| |
| to the video output (3 or 4). |
|
- 15 -
/ |
