Using the ASCII Terminal Interface

2-7

7612-A2-GB20-10 November 1997
Switching to the Screen Function Key Area
Selecting Ctrl-a allows you to switch between the two screen work areas to
perform all screen functions.
Procedure
To access the screen function area below the dotted line:
1. Press Ctrl-a to switch from the screen area to the screen function key area
below the dotted line. The available selections for the first input field appear
on the last line as shown below.
2. Select either the function’s designated (underlined) character or press the tab
key until you reach the desired function key.

Example:

To save the changes you have made on this screen, enter s or S (Save).
3. Press Return. The function is performed.
4. To return to the screen area above the dotted line, press Ctrl-a again.
main/configuration/edit/term
Device Name: Node A Model: 7612
TERMINAL PORT OPTIONS
Data Rate (Kbps): 9.6
Character Length: 8
Parity: None
Stop Bits: 1
Monitor DTR: Enable
Login Required: Enable
Port Access Level: Level 1
Inactivity Timeout: Enable
Disconnect Time(minutes): 5
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save