Paradyne 7612 SNMP DSU manual Extension to Interface Table ifXTable, IfXEntry

MIB Descriptions

Table C-2. Interfaces Group Objects (4 of 4)

Object

Description

Setting/Contents

ifOutOctets (ifEntry 16)

ifOutUcastPkts (ifEntry 17)

ifOutDiscards (ifEntry 19)

ifOutErrors (ifEntry 20)

Collects output statistics on data received by the interface.

Applies to the IMC and the Ethernet port. Statistics are not collected if the Ethernet port is disabled.

An integer number.

Extension to Interface Table (ifXTable)

This extension contains additional objects for the Interface table. Table C-3shows the objects supported.

Table C-3. Extension to Interface Table (ifXTable)

Object	Description	Setting/Contents
ifName	Provides name of the	Interface text strings:
(ifXEntry 1)	interface.	H Ethernet Port
		H Terminal Port
		H DDS Network
		H User Data Port
		H In-band Management Channel
ifLinkUpDown-	Indicates whether the link is	Only supports DDS network and User
TrapEnable	up or down, or enterprise-	data port.
(ifXEntry 14)	specific traps should be	SNMP Traps must be enabled for the
	generated.
		unit. See Table A-9,SNMP Traps
		Options.
ifHighSpeed	Reflects the ifSpeed setting	This object is supported as read-only.
(ifXEntry 15)	for the interface.
ifConnector-	Indicates whether there is a	true(1) ± Will always have this value for
Present	physical connector for the	the DDS network, Ethernet port,
(ifXEntry 17)	interface.	Terminal port, and User Data port.
		false(2) ±Will always have this value for
		the In-band Management Channel.

C-6 November 1997 7612-A2-GB20-10