MIB Descriptions
C-12 7612-A2-GB20-10November 1997
ICMP Group
The ICMP (Internet Control Management Protocol) Group objects are fully
supported.
TCP Group
The TCP Group objects are fully supported, with the exception of tcpConnState
object, which will be read-only, since deleteTCB (12) is not supported and is the
only value which can be set.
UDP Group
The UDP Group objects are fully supported.
Transmission Group
Objects in the Transmission Group are supported on the DDS network interface,
User Data port, Ethernet port, and Terminal port. These objects are defined
through other Internet-standard MIB definitions rather than within MIB II.
Table C-7 shows how Transmission Group objects are supported.
Table C-7. Transmission Group Objects
Object Description
dot3
(transmission 7)
Supported on the Ethernet port. Defined by the Ethernet-like
MIB (RFC 1643).
rs232
(transmission 33)
Supported on the User Data port and Terminal port. Defined by
the RS-232-like MIB (RFC 1659).
enterprise
(transmission 22)
Supported on the DDS network interface by Paradyne
Enterprise MIB.
SNMP Group
The SNMP Group objects that apply to a management agent are fully supported.
The following objects apply only to an NMS and return a zero value if accessed.
snmpInTooBig (snmp 8)
snmpInNoSuchNames (snmp 9)
snmpInBadValues (snmp 10)
snmpInReadOnlys (snmp 11)
snmpInGenErrs (snmp 12)
snmpInGetResponses (snmp 18)