Manuals / Paradyne / Computer Equipment / Network Card

Paradyne 7612 SNMP DSU manual Saving Configuration Options, If you select Then

Models: 7612 SNMP DSU

1 126

Download 126 pages 50.91 Kb

Page 27

Configuring the DSU

Saving Configuration Options

When changes are made to the configuration options, the changes must be saved to take effect. The Save key and Save Configuration To screen appear when the user has an effective access level of 1. All other effective access levels have read-only permission.

"Procedure

To save configuration options changes:

1.Press Ctrl-a to switch to the screen function key area below the dotted line.

2.Select Save and press Return. The Save Configuration To screen appears.

3.Select one of the three configuration option areas on the screen and press Return. When Save is complete, Command Complete appears in the message area at the bottom of the screen.

NOTE:

If you attempt to leave the edit session without saving your changes, a Save

Configuration screen appears requiring a Yes or No response.

If you select . . .

Then the . . .

Yes

No

Save Configuration To screen appears.

Main Menu appears and changes are not saved.

3-6

November 1997

7612-A2-GB20-10

Image 27

Paradyne 7612 SNMP DSU manual Saving Configuration Options, If you select Then

Contents

Model 7612 Snmp DSU Copyright 1997 Paradyne Corporation All rights reserved Contents Configuring the DSU Messages and Troubleshooting Worksheets Technical Specifications Glossary Index About This Guide Document Purpose and Intended AudienceDocument Summary Product-Related Documents About the DSU Model 7612 Snmp DSU FeaturesNovember Typical Snmp DSU Configurations Snmp Management Capabilities Rear Panel Interface ConnectionsManagement Information Base MIB Support Using the Ascii Terminal Interface Accessing the ATIConnecting to the Terminal Port Edit/Display Status Test Configuration ControlMain Menu SelectScreen Format Types What Affects Screen DisplaysUse the screen format Menu Path Screen Work AreasNavigating the Screens Keyboard KeysPress For the screen Select Press Return to Function Screen Function KeysSwitching to the Screen Function Key Area Ending an ATI Session Configuring the DSU Entering Device and System InformationMain Menu → Control → Device Name System Fields Device NameAdditional Identity InformationMain Menu → Status → Identity Keys to viewConfiguring the DSU Configuration Option AreasConfiguration Option Area Configuration Option Set Main Menu → Configuration → Load Configuration From Accessing and Displaying Configuration OptionsIf you select Then Saving Configuration OptionsOverview SecurityCreating a Login Main Menu → Control → Administer LoginsOn the Administer Enter Logins screen, for ATI Access Deleting a LoginEffective Access Levels ATI Access to Menu Functions Effective Access LevelConnection Refused See Table A-5User Interface Already Interface Idle appearsAssigning Snmp Community Names and Access Types Controlling Snmp AccessSelecting an IP Addressing Scheme IP AddressingIP Addressing Scheme Examples IMC Connection ± Same SubnetSubnet Frame Relay Network Using Routers to Route DSU Management DataAssigning IP Addresses and Subnet Masks If using Then assignWhat to Monitor Monitoring the DSUDSU LEDs Alarm Test DM OOS OOF NS TXD RXD RTS CTS DTRSystem LEDs AlarmNetwork LEDs DM ± Data ModeOOS ± Out of Service NS ± No SignalPort LEDs Status Screen Commands System and Test StatusMain Menu → Status → System and Test Status Yyyyyyyy Self-Test Results Messages What Message Indicates What To Do Self-Test ResultsTest Status Messages Meaning Test Status MessagesMain Menu → Status → Network Interface Network Interface StatusNetwork Performance Statistics Network Performance StatisticsMain Menu → Status → Ethernet Port Status Ethernet Port StatusMain Menu → Status → Management Protocol Statistics Management Protocol StatisticsMonitoring the DSU ATI Status Alarm Specific Trap Screen TestingDetecting Problems Alarm ConditionMain Menu → Test Tests AvailableNetwork Tests CSU or External Network LoopbackMain Menu → Test → Network Tests DSU or Internal Network Loopback Send V.54 Up/Down SequencesTest Pattern for the Network Main Menu → Test → Data Port Tests Data Port TestsLocal Loopback Test Pattern for the DTEEnding an Active Test Lamp TestLoopbacks Loopback Type Initiated By LoopbacksDevice Reset If entering yes to prompt Then all Configuring Snmp Traps Messages and TroubleshootingDevice Messages 1 What Message Indicates What To Do Device MessagesTroubleshooting Troubleshooting 1 Symptom Possible Cause SolutionsDevice Messages 2 What Message Indicates What To Do Tests Available in Chapter Troubleshooting 2 Symptom Possible Cause SolutionsEdit/Display Status Configuration Option TablesTable A-1. System Options 1 Select To Access To ConfigureOperating Mode System Options MenuLads Line Rate Kbps Lads Timing Possible Settings Internal, External, ReceiveTable A-1. System Options 2 DDS Line Rate KbpsTest Timeout Table A-1. System Options 3Test Duration min Data Scrambling 64K CC Network Interface Options MenuTable A-2. Network Interface Options 1 Network-initiated DSU Loopback 64K CCIMC Routing Information Protocol Table A-2. Network Interface Options 2Bilateral Loopback Data Port Options MenuTable A-3. Data Port Options 1 Invert Transmit ClockTable A-3. Data Port Options 2 Carrier Control by RTSRlsd Control Table A-4. Ethernet Port Options 1 Port Use Possible Settings 802.3, Version 2, DisableEthernet Port Options Menu Table A-3. Data Port Options 3Character Length Terminal Port OptionsTable A-4. Ethernet Port Options 2 Table A-5. Terminal Port Options 1Parity Login RequiredPort Access Level Possible Settings Level 1, Level 2, Level Table A-5. Terminal Port Options 2Telnet Session Options Table A-5. Terminal Port Options 3Table A-6. Telnet Session Options 1 Disconnect Time minutes Table A-6. Telnet Session Options 2Snmp Menu General Snmp Management OptionsTable A-7. General Snmp Management Options 1 Table A-8. Snmp NMS Security Options 1 Name 2 AccessSnmp NMS Security Options Table A-7. General Snmp Management Options 2Table A-8. Snmp NMS Security Options 2 Access LevelNumber of Trap Managers Snmp Traps OptionsTable A-9. Snmp Traps Options 1 Snmp TrapsLink Trap Interfaces Link Traps Possible Settings Disable, Up, Down, BothTable A-9. Snmp Traps Options 2 Enterprise Specific TrapsConfiguration Worksheets Configuration Option SettingsWorksheets None, Proprietary Network InterfaceTerminal Port Snmp NMS Security General Snmp ManagementMIB II ± RFC 1213 and RFC MIB DescriptionsInternet 4 ± Layer System GroupPhysical 1 ± Layer Datalink/subnetwork 2 ±IfEntry Interfaces GroupEthernetCsmacd6 ± Used for Testing3 state Ethernet portEthernet port is IfXEntry Extension to Interface Table ifXTableTesting3 Interface Stack GroupDown2 IfTestEntry Interface Test TableInSyncNoBitErrors ifTestCode 2 ± InSyncWithBitErrorsGeneric Receive Address Table IP Group Table C-6. IP Group Objects 1 Description Setting/ContentsTable C-6. IP Group Objects 2 Description Setting/Contents Transmission Group Icmp GroupTCP Group UDP GroupRS-232-Like MIB, RFC Number of RS-232-Like Ports ObjectGeneral Port Table Objects Rs232Async PortEntry Asynchronous Port Table ObjectsSynchronous Port Table Objects Input Signal Table Objects Rs232SyncPortMinFlags rs232SyncPortEntryInteger number ± represents Output Signal Table Objects Ethernet-Like MIB, RFCEnterprise MIB Device Traps, pdn-traps pdn-common Device Configuration Variable pdn-commonDDS Interface Specific Definitions, pdn-dds pdn-interfaces Device Security, pdn-security pdn-commonSnmp Trap Description Possible Cause Standards Compliance for Snmp TrapsTrap warmStart Trap authentificationFailureInterface LinkUp/Down Variable-Bindings Possible Cause Traps linkUp and linkDownTrap What It Indicates Possible Cause Traps enterpriseSpecific7612-A2-GB20-10 Cables and Pin Assignments Signal Direction Pin # Terminal Port EIA-232 ConnectorDTE Port V.35 Connector SignalNumber Direction Pin Socket Connector Pin Standard EIA-232-D Crossover CableStandard Null-Modem Cable Use Circuit Pin # 10BaseT ConnectorModular RJ48S DDS Network Interface Connector Use Pin #Table F-1. Model 7612 DSU Technical Specifications 1 Technical SpecificationsTable F-1. Model 7612 DSU Technical Specifications 2 7612-A2-GB20-10 November Glossary Excessive BPV Factory defaultsEIA-232 Enterprise MIBManager Snmp ResetLink layer protocol LoopbackSubnet mask RS-232Subnet Subnet addressNumbers IndexIN-2 IN-3 IN-4 IN-5