Configuring the DSU

3-5

7612-A2-GB20-10 November 1997
Accessing and Displaying Configuration Options
To display the configuration options, you must first copy one configuration option
set into the edit area.
"Procedure
To load a configuration option set into the configuration edit area:
1. Follow this menu selection sequence:
Main Menu
→
Configuration
→
Load Configuration From
2. Select one of the four configuration option areas listed in the table in
Configuration Option Areas
on page 3-4.
3. Press Return. The selected configuration option set is loaded and the
Configuration Edit/Display menu screen appears.
No configuration edits are allowed when the effective access level is 2 or 3.
Configuration is read-only and allows viewing only of configuration option
settings. If the effective access level is not 1:
HThe last line of the Load Configuration From screen reads:
Access Level is
n
, Configuration is read-only
HThe Save prompt will not appear on any screens.
Refer to Chapter 4,
Security
.