5. EASI-V SOFTWARE 83
The general
configuration
screen allows
adjustment of motor
brake settings,
communication
settings, analogue
input control and
defines what is
monitored by the
monitor output.
The state of system
variable ES can
also be set via this
screen.
Click ‘Next>’.
With ES ticked (ES=1) the drive is energised without any connection being made between
X4 pin 11 and X4 pin 3 or 4.
This screen
indicates the
completion of the
guided servo setup.
Clicking on the
‘Create a setup
program’ creates a
configuration file
which may be
saved to disk on the
controlling PC.
Clickin on
‘Download
immediately’
downloads the
configuration file to
the drive.
NOTE
ANY CHANGES TO THE MOTOR COMMAND MUST BE FOLLOWED BY A SAVE (SV)
AND RESET (Z) OR CYCLING POWER TO THE DRIVE.