Pelco C1629M-F - page 18

18 C1629M-F (3/08)
Figure 12. Attaching Support Rails
6. Repeat step 5 for the second support rail assembly.
7. Attach one rack rail spacer to the front of the equipment rack (refer to Figure13):
a. Position the bottom hole of the spacer above the ear of the front-mount rail.
b. Insert two 10-32 x 0.5-inch Phillips flat head screws into the spacer, one in the top hole and one in the bottom hole. Leave the middle
hole empty; the top thumbscrew on the DVR5300 will use it.
c. Tighten the two screws to secure the spacer to the rack.
REAR- RAILMOUNT
FRONT- RAILMOUNT
(4) SCREWS
10-32 X 0.5-INCH
PHILLIPS FLAT HEAD
(4) SCREWS
10-32 X 0.75-INCH
PHILLIPS PAN HEAD
RACK FRONT RACK REAR