Pelco C1629M-F - page 19

C1629M-F (3/08) 19
Figure 13. Attaching Rack Rail Spacers
8. Repeat step 7 for the second spacer.
9. Tighten the 8-32 x 0.375-inch Phillips truss head screws that were attached to the front- and rear-mount rails in steps 2 and 3.
10. Place the unit onto the mount rails by sliding the chassis brackets onto the rails. This step may require two people to lift and slide the unit
into place. The unit should slide in and out of the rack easily.
SPACER
(2) SCREWS
10-32 X 0.5-INCH
PHILLIPS
FLAT HEAD