22 C1629M-F (3/08)
On six-drive models (1.5 TB/3.0 TB), carriers 1 through 6 contain hard drives. Carriers 7 through 12 do not contain hard drives, but should be
installed to maintain proper air circulation in the unit.
Upgrade kits are available that increase the unit capacity of the six-drive models by 1.5 TB or 3.0 TB. Each upgrade kit includes six filled
hard drive carriers. Contact Pelco’s Product Support for more information (refer to Appendix F: Troubleshooting on page 43 for contact
information).
3. Install the first hard drive carrier as follows:
a. Orient the drive carrier so that the drive status indicator is pointing up.
b. Align the tapered ends of the carrier rails with the correct drive slot opening.
c. Slide the drive carrier gently into the unit. Make sure the carrier snaps into place.
Figure 18. Hard Disk Drive Carrier Installation
WARNING: The hard drive carrier fits into the unit only one way. If you have difficulty in serting a carrier, remove it and check its
orientation.
DRIVE NUMBER LABEL
DRIVE STATUS INDICATOR