C1629M-F (3/08) 23
4. Make sure the hard drive carrier has been installed correctly. Without squeezing the spring-loaded release tabs, gently pull the plastic fr ont
cover of the carrier away from the chassis. If the carrier does not pull out, the drive is secure.
Figure 19. Checking Hard Disk Drive Carrier
5. Repeat steps 3 and 4 for each drive carrier.
6. Close and lock the bezel cover.
NOTE: During operation, monitor the unit status indicator lights to make sure that all drives are operating properly. In case of failure, system
alarms and error messages will also display on WS5000 Endura workstations and VCD5000 video console displays.