Pelco C1629M-F - page 37

C1629M-F (3/08) 37
Figure 31. Removing the Hard Drive Carrier
7. Copy the drive number onto the drive label on the replacement hard drive carrier.
8. Install the replacement hard drive carrier as follows:
a. Orient the drive carrier so that the drive status indicator is pointing up.
b. Align the tapered ends of the carrier rails with the correct drive slot opening.
c. Slide the drive carrier gently into the unit. Make sure the carrier snaps into place.
WARNING: Never remove more than one drive at a time. Wait until the new drive is fully initialized.
WARNING: The hard drive carrier fits into the unit only one way. If you have difficulty in serting a carrier, remove it and check its
orientation.
DRIVE NUMBER LABEL