Pelco C2900M-B(1/03 Command Reference, Cmd Description, PelcoNet tries to call the alarm IP host

Command Reference

The following table gives an overview of all available commands. (Enter the appropriate informa- tion where indicated by the quotation marks below. Do not enter the quotation marks.)

	Table A. Terminal Command Reference
Cmd	Description
?	Displays the help screen.
i	Set up a new IP address.
	-> Enter new IP address (old:192.168.152.160): ‘new
	IP address’ [Enter]
	-> IP address set to <new IP address>
s	Set up a new subnet mask.
	-> Enter new subnet mask (old:255.255.255.0): ‘new
	subnet mask’ [Enter]
	-> subnet mask set to <new subnet mask>
g	Set up a new gateway IP address.
	-> Enter new gateway IP address (old:192.168.0.10):
	‘new gateway IP address’ [Enter]
	-> gateway IP address set to <new gateway IP address>
a	Set up a new alarm IP to connect to.
	-> Enter new alarm IP address (old:192.168.0.3): ‘new
	alarm IP address’ [Enter]
	-> Alarm IP address set to <new alarm IP address>
c	Connects a live video to the specified alarm IP.
	-> connecting . . .	PelcoNet tries to call the alarm IP host
	connected	PelcoNet has established the connection
d	Disconnects any pending video connection.
	-> disconnecting . . .	PelcoNet disconnects
	disconnected	PelcoNet has disconnected

36 C2900M-B (1/03)