Pelco C2900M-B(1/03 manual Video Priority ActiveX, Example, the Internet, 1000, Same data rate

Table D. Video Settings (Continued)

Configuration	Default Setting	Description
Item
Video Priority	ActiveX	This field controls whether performance of the device
		is optimized for MJPEG or ActiveX (H.261/H.263).
		If you select MJPEG mode, a sequence of still images
		(for example, a fresh image every second) is
		displayed in the browser. This setting does not
		require any plug-ins or ActiveX installation and may
		be advisable for severely limited channels (for
		example, the Internet).
		PelcoNet recommends choosing ActiveX for best
		video performance. This provides the best quality and
		lowest data rate consumption. When you choose this
		the first time, the corresponding ActiveX is down-
		loaded automatically to your PC from the Pelco home
		page.
Video bandwidth	1000	This field controls the transmitter bandwidth setting
ActiveX		for live video. This value relates only to the video
		transmission rate (without audio and protocol).
		Receivers can log into the transmitter with a lower or
		same data rate.
		In streaming mode, this value indicates the data
		transmission rate of the video. Select a video
		transmission rate between 10 Kb/sec and 1 Mb/sec.
Network interface	1000	This field lets you adjust the maximum data rate that
bandwidth		will be sent over the network.
		Enter the data transmission rate in kbits per second.
		Valid entries are 10 through 1000.
		The value is the maximum bandwidth for the video
		data. Also, transmission bandwidth is needed for
		data; to control cameras, for example. Therefore, an
		actual transfer value can be over or under the
		adjusted value.
Camera 1-4 names	n/a	Enter the desired camera names (nine characters
		maximum for each). Camera 1 is video 1 input. In
		addition to the unit name, the camera names help the
		user identify the locations or the visible scenes.
		(Continued on next page)

50 C2900M-B (1/03)