Pelco C2900M-B(1/03 Partially obscure Time Stamping, Time stamping Off, Time slice, Jpeg Size

	Table D. Video Settings (Continued)
Name stamping	off	Name Stamping is a combination of unit name and
		camera name (18 characters maximum). This
		identifier can be stamped on the video image.
		Choose top for upper left corner or bottom for lower
		left corner to display the name information inside the
		video image. Choose off if you do not want the
		names displayed. (Note that when Name Stamping
		and Time Stamping are assigned to the same
		position, Name Stamping has priority and will
		partially obscure Time Stamping.)
Time stamping	off	Similar to name stamping, date and time information
		can be stamped on the live video image at either the
		upper or lower right corner. Stamping occurs at the
		transmitter before the actual coding takes place.
		Therefore, the name and date/time information are
		an integral part of the coded and transmitted data.
Time slice	0	Enter the time interval in seconds at which single
		images should be sent for storage on an FTP server.
		These images can be accessed later (for example, to
		reconstruct alarm events). Enter 0 if no single images
		are to be stored.
JPEG Size	M	This field designates the size of each JPEG image
		that will be posted to the FTP server for storage.
JPEG file name	Overwrite	When you save a snapshot to your PCÕs hard disk, this
		field specifies whether the file gets overwritten by
		the next save, or another file is created with a higher
		number (Increment), or another file is created with a
		Date/Time designator. The file nameÕs root is always
		Òsnap.Ó
FTP server	0.0.0.0	Enter the IP address of the FTP server on which the
IP address		images will be stored.
Login name	n/a	Enter the login name used to access the FTP server.
Password	n/a	Enter the password used to access the FTP server.
Path	n/a	Enter the directory under which the images are to be
		stored on the FTP server.

C2900M-B (1/03) 51