Pelco C2900M-B(1/03 manual Network Settings Configuration

Network Settings Configuration Page

Figure 27. Network Settings Configuration Page

Network and routing information make up the Network Settings configuration page. The following table describes the configuration items.

Table C. Network Settings

Configuration	Default Setting	Description
Item
IP address	192.168.0.1	Enter a unique IP address that is valid for your network.
		The pre-configured default IP address allows for easy
		configuration in closed environments. You can use a
		crossed cable to directly connect to a PC. Also, the PCÕs IP
		address and subnet mask must match the default IP
		address.
		NOTE: Changing the IP address also affects the current
		browser connection. You will have to enter the new URL to
		regain connectivity to the unit.
Subnet mask	255.255.255.0	Enter a valid subnet mask for your network, if subnets are
		in use.
Gateway IP	none	Enter the IP address of the router. This is typically used in a
		WAN environment.
		(Continued on next page)

46 C2900M-B (1/03)