Pelco C2900M-B(1/03 manual D E N D U M, International Tel 1-559/292-1981 Fax 1-559/348-1120

A D D E N D U M

Addendum No.: C2900MB-ADDEN

Date: October 15, 2003

Manual Affected: PelcoNetª Multimedia Transmission Via Networks Ð NET104A Series Ð C2900M-B

Manual Update: In the NOTE in the Specifications section, replace “NETRANS4” with “NETPLUG4” as the replacement transformer.

In Appendix B – Frequently Asked Questions (FAQs), replace the answer to question 10 with the follow- ing paragraph.

Yes. You must have Genex Version 4.1 or higher for Genex units manufactured before November 22, 2002Ñor Version 1.12 or higher for units manufactured on or after that date. (The version numbering was restarted in 2002, which is why newer units have a smaller version number.) These versions let you connect a KBD4000 to the Genex COM IN port and PelcoNet to the Genex COM OUT port. This gives you both local and remote control. Refer to Connecting PelcoNet to the COM OUT RS-422 Port on a Genex Multiplexer in Appendix A for detailed information.

®

Pelco World Headquarters • 3500 Pelco Way, Clovis, California 93612-5699 USA USA & Canada: Tel: 800/289-9100 • Fax: 800/289-9150

International: Tel: 1-559/292-1981 • Fax: 1-559/348-1120

www.pelco.com