Pelco C2900M-B(1/03 manual Video alarm Off, Triggers the alarm, Motion alarm Off, Movement

The set of video surveillance features is explained below.

Table F. Alarm Settings

Configuration	Default Setting	Description
Item
Video alarm	off	If you select on, the signal from the video source (the
		camera in most cases) is monitored constantly for
		interruption. If no signal is received, the NET104A
		triggers the alarm.
Motion alarm	off	The system has a video motion detection feature.
		The video scene is monitored constantly for relevant
		motion.
		To set motion detection, do the following:
		1. Select on to trigger an alarm in the event of
		movement.
		2. Click the Configuration button to access the Motion
		Detection screen. If you want to accept the factory
		settings, click the Defaults button.
		3. Use the Camera input pull-down menu to select the
		camera view you want motion detection on.
		4. Click the Select area button to display a window with
		a grid superimposed on it. Select the cells in the image
		you want the system to monitor for motion. To set an
		individual cell, click it with the left mouse button (it will
		turn red). Click with the right button to deselect a cell
		(which will turn white). Select or deselect multiple
		cells by holding down the left or right mouse button
		and dragging. Release when finished.
		5. Use the Motion tracking pull-down menu to turn
		on/off tracking.
		6. The Tracker box indicates and controls the direction of
		motion detection. You can set motion detection to
		operate in one direction only by removing the check
		marks in the opposite direction.
		(Continued on next page)

C2900M-B (1/03) 55