DIRECTION
MAIN MENU
<Limit Stop>
<Other>
EXIT
Other Menu
Park Time | 0 |
Pan/Scan Spd | 7 |
Power Up | Default |
Pat length | 6 min |
Spd Profile 50 MPH wind
<Zone Blank>
<Az/El/Direction>
Exit
Az/El/Direction
Set Azimuth Zero
Az/El
Az/El Line
Direction
Direction Line
Disp Duration
Exit
NOTE: For direction to be accurate, the azimuth zero must be set to magnetic north.
NOTE: Direction display is not available while you are programmming or running a pattern.
Direction programs the horizontal display position of the Direction label (N, NW, NE, …).
The following settings are available for the Direction label:
Off – Label is not displayed.
Left – Label is displayed on the
Center – Label is displayed in the center of the screen.
Right (default) – Label is displayed on the
To program the horizontal label position for Direction:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside Other.
3.Press the Iris Open button to enter the Other menu.
4.Position the cursor (>) beside Az/El/Direction.
5.Press the Iris Open button to enter the Az/El/Direction menu.
6.Position the cursor (>) beside Direction.
7.Press the Iris Open button. The cursor moves to the right.
8.Move the joystick up or down to view the available selections.
9.SELECT – Press the Iris Open button to make a selection. CANCEL – Press the Iris Close button to cancel a selection.
Pelco Manual | 21 |
