Pelco es3012 installation manual Appendix, Baud Rate, Switch Setting SW1-4 SW1-5

APPENDIX

NOTE: Esprit will sense and automatically select input from Coaxitron control signals in either the standard or extended mode. Therefore, the DIP switches settings have no effect on Coaxitron control signals.

Table A. Switch Settings for SW1

Baud Rate		Switch Setting
	SW1-1		SW1-2	SW1-3
2400	OFF		OFF		OFF*
4800	ON		OFF		OFF*
9600	OFF		ON		OFF*

* SW1-3 is not used; set it in the OFF position.

				Switch Setting
	SW1-4	SW1-5		SW1-6	SW1-7	SW1-8
	OFF*	Note (1)		Note (2)	Note (3)	Note (4)
NOTES:
(1)	SW1-5	OFF	- For controllers that have more than 32 presets.
		ON	- For American Dynamics controllers (32 presets).
(2)	SW1-6	OFF	- For all control systems except CM9502 with variable
			speed keyboards. For CM9502 with fixed speed keyboards,
			set switch OFF.
		ON	- For CM9502 with variable speed keyboards to get
			smoother joystick control.
(3)	SW1-7	OFF	- RS-422 transmitter is not terminated.
		ON	- RS-422 transmitter is terminated.
(4)	SW1-8	OFF	- RS-422 receiver is not terminated.
		ON	- RS-422 receiver is terminated.

* SW1-4 is not used; set it in the OFF position.

32 Pelco Manual C306M-K (4/05)