PAN AND TILT INSTALLATION
NOTE: The illustrations show the ES3012 Esprit mounted to an EWM wall mount.
1 When installing the ES3012 Esprit system, allow for sufficient clear- ance between the top of the unit and overhead obstructions. This will prevent interference when the en- closure is driven to its maximum el- evation of 40 degrees.
40°
17.06
(43.33)
6.77
(17.20)
4.67
8.30
(11.86) (21.08)
2 Remove the transformer module from the base of the system by loosening the four Phillips screws and lifting the module.
3 Attach the base of the system to an Esprit mount (EWM or EPP) with the three flathead
LOOSEN | TRANSFORMER |
PHILLIPS | |
SCREWS | MODULE |
BASE
MOUNTING
SCREWS
MOUNT
BASE
01475
Pelco Manual | 9 |
