Pelco manual DN/CH Series Adjustments, Refer to to adjust the IP110-DN or IP110-CH model

DN/CH SERIES ADJUSTMENTS

Refer to Figure 17 to adjust the IP110-DN or IP110-CH model.

Figure 17. Adjusting the IP110-DN/CH Series Camclosure

SWITCH SETTINGS

Locate the DIP switch. Then set the switches for your installation.

SW4-1: Auto Gain Control

The automatic gain control (AGC) adjusts the image automatically to compensate for changes in light levels.

Set SW4-1 to ON to enable AGC. Set it to OFF to disable AGC. The default setting is ON.

SW4-2: Backlight Compensation

The backlight compensation (BLC) feature compensates for backlit scenes by enhancing objects in the center of the scene.

Set SW4-2 to ON to enable BLC. Use this setting if a bright backlight is present and the subject in the center of the picture appears dark or as a silhouette.

Set it to OFF to disable backlight compensation. This is the default setting.

SW4-3: N/A

24 C3432M-G (4/09)