MEMO

The built-in flash does not pop up even if the flash pop-up button is

pressed with the flash mode is set to (Flash OFF).

When the flash pop-up button is pressed, disappears and appears on the LCD panel, which indicates the flash always fires regardless of the light conditions.

The shutter cannot be released until the flash is fully charged.

To enable shutter release before the flash is charged, set custom function number [CF7] to [2]. See pages 134 and 138.

Do not use a lens hood with the built-in flash as it may obstruct the path of the light coming from the flash, causing vignetting in the picture corners.

With the built-in flash popped up, an external flash cannot be attached to the hot shoe. If you would like to use an external flash together with the built-in flash, see the flash connections on page 124.

107

BASIC OPERATION

(PREPARATION)

BASIC OPERATION

(SHOOTING)

ADVANCED OPERATIONS

 

OTHERS

 

Page 109
Image 109
Pentax ist manual 107