Pentax ist manual Setting the Auto POP UP Flash

Step 6

SETTING THE AUTO POP UP FLASH

1 Press the flash mode button

until appears on the LCD panel.

2 In this mode, the built-in flash automatically pops up when pressing the shutter button halfway down in the low light or backlight conditions.

✍MEMO

•The built-in flash does not retract automatically except when you turn off the power, push the built-in flash down after use.

•If the flash pop up button is pressed after the flash popped up

automatically, disappears and the camera turns into the flash on mode.

•The auto pop up flash can only be selected in the auto picture mode and picture mode.

•The built-in flash does not discharge when not required even if it is in the up position. See page 102 for more details.

•Do not use a lens hood when the built-in flash is used, as it may obstruct the path of the light coming from the flash, causing vignetting in the picture corners.

45

BASIC OPERATION	(PREPARATION)
BASIC OPERATION	(SHOOTING)
ADVANCED OPERATIONS
OTHERS