Pentax ist manual Take the first picture, Take the second picture

62

SELECTING A DRIVE MODE

2 Take the first picture.

The frame number and on the LCD panel blink.

Take the second picture.

The frame number stops blinking and the film is advanced to the next frame, then the camera returns into single-frame drive mode.

✍MEMO

•To expose the third shot, press the drive mode button after step 2- ,

then go to step 2- . To expose more shots, always press the drive

mode button to let stop blinking in advance of taking the next shot. If you do not press the drive mode button before taking the next shot, that shot will be the last one.

•The multi-exposure shooting mode remains in effect even after the main/preview switch is turned off. To cancel the multi-exposure shooting mode, remove the batteries once and load again. After replacing the batteries, be sure to set the time and date imprinting mode again. See page 28.