Safety
1.Two people are required to lift and carry a TV that weighs more than 25 kilogrammes. Improper handling of the TV can cause serious injury.
2.If you place the TV set on a surface, ensure the surface is level and that it can withstand the weight of the TV.
3.Mounting the TV on the wall requires special skill that should only be performed by a qualified personnel. You should not attempt to do the work yourself. Philips bear no responsibility for improper mounting or mounting that results in accident or injury.
4.This TV is compatible with the VESA wall mounting standard. Please contact your local electronics retailer for a VESA compliant bracket to wall mount this TV. Before you mount your TV on a wall, ensure the wall is suitable to carry the weight of the TV.
5.Wherever you place or mount the TV, ensure that air can circulate freely through the ventilation slots. Do not place the TV in a confined space.
6.Do not place naked flame sources such as lighted candles close to the TV.
7.Do not expose the TV or the batteries of the remote control to heat, direct sunlight, rain, or water.
X 
X
8.Do not place a vessels filled with water on top of or near to the TV. Spilling water into the TV can result in electric shock. If you spill water into the TV, do not operate the TV. Immediately
disconnect the TV from the mains and have the TV checked by a qualified technician.
9.Do not touch any part of the TV, power lead, or aerial lead during lightning storms.
10.Do not leave the TV in standby mode for an extended period of time. Instead, disconnect the TV from the mains.
11.The TV set is always connected to the mains. You can disconnect the TV from the mains by doing one of the following tasks:
•unplugging the mains cord located at the back of TV set
•unplugging the mains plug from the mains socket outlet
Pull the power cord by the plug - do not pull on the power cord.
12.Ensure that you always have easy access to the mains cord or the mains plug to disconnect the TV from the mains.
13.Ensure the power cord is fully inserted into the TV mains socket and the wall socket.
14.If the TV is mounted on a swivel base or swivel arm, ensure no strain is placed on the power cord when the TV is swivelled. Strain on the power cord can loosen connections and cause arcing or fire.
15.Verify that the mains supply voltage in your home corresponds to the voltage printed on the sticker at the rear of the TV.
4
