Playback
Playing a DVD+RW or DVD+R disc
•Insert a DVD+RW or DVD+R disc.
‰If the inserted disc is
•Press 2 PLAY.
‰Playback starts automatically from the point where it was stopped the last time the disc was played or recorded. If you want to start playback from the beginning of the disc, you can do so via the Index Picture Screen (see ‘Index Picture Screen’).
‰If the disc is a new blank disc, the display will show ‘EMPTY DISC’.
•To stop playback at any time, press 9 STOP.
‰You return to the Index Picture Screen.
Playing a pre-recorded DVD- Video disc
Some DVD discs are produced in a way that requires specific operation or allows only limited operation during playback. In these cases the recorder may not respond to all operating commands. When this occurs, please refer to the instructions in the disc inlay. When a 
appears on the TV screen, the operation is not permitted by the recorder or the disc.
‰The currently playing title and chapter number are displayed on the recorder display. The elapsed time is shown also.
Notes:
-DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your recorder, you will see the region code notice on the screen. The disc will not play, and should be unloaded.
-The region code is stated on a label on the back side of your recorder.
-Regional coding is not applicable for recordable DVD discs.
•The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical key; if not, use the w v u t (down up right left cursor) keys to highlight your selection, and press OK.
•To stop play at any time, press 9 STOP.
‰ The default screen will appear, giving information about the current status of the recorder.
PREVIOUS REC/OTRNEXT
REVERSE PAUSE SLOW FORWARD
STOP | FSS | PLAY | ||
|
|
|
|
|
|
|
|
|
|
Note :
During playback you can display and enter the menu by pressing DISC MENU.
English
•Insert a
want to play is facing up.
‰When ‘autoresume’ is set to ‘On’ (see ‘User Preferences’) playback starts automatically from the point where it was stopped, the last time the disc was played.
‰When ‘autoresume’ is set to ‘Off’, the disc will play from the start of the disc. You can however resume play from the point at which you stopped,
the last time the disc was played, by pressing
2 PLAY when 
appears on screen.
Playing a (Super) Video CD disc
•Insert a (Super) Video CD.
‰ When ‘autoresume’ is set to ‘On’ (see ‘User
Preferences’) playback starts automatically from the point where it was stopped, the last time the disc was played.
‰The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical key
•To stop play at any time, press 9 STOP. ‰ The default screen will appear.
PLAYBACK 37
