Enter the number.
Press 
to confirm.
Press 
to return to standby.
9.4.3Dial a baby call number 1 When a baby call number
has been stored and the baby call setting switched on, press any key (except
) on the keypad to dial the number.
Note
When baby call is switched on, you can still answer any incoming call as normal.
9.5 Registration
Up to 5 handsets can be registered to one base station. Additional handsets must be registered to the base before you can use them.
Notes
•The instructions described below apply specifically to your Philips SE245 handset.
If you wish to register another manufacturer’s handset, the instructions may vary. In this case, please refer to the manufacturer of the additional handset.
•The Master PIN is required before you can register or unregister handsets.The default PIN is 0000.
9.5.1 Register a handset
At the base, press and hold 
for about 3 seconds. The base station emits a beep when it is ready to accept registration.
Note
The base is able to accept registration from a handset within 90 seconds. If 
is pressed, registration is cancelled.
At the handset, press 
and scroll 
to ADVANCED SET and press 
.
Scroll 
to
REGISTRATION and press
.
36 | Advanced settings |
