Philips SE245 manual Power requirements, Keep the product away from liquid

1 Important

Take time to read this user manual before you use your telephone. It contains important information and notes regarding operating your telephone.

1.1Power requirements

• This product requires an electrical supply of 220–240 volts, alternating monophased power, excluding IT installations defined in standard EN 60-950. In case of power failure, the communication can be lost.

• The electrical network is classified as hazardous according to criteria in the standard EN 60-950.The only way to power down this product is to unplug the power supply unit from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible.

•The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60-950.

Warning

•This equipment is not designed to make emergency calls in the event of a power failure. An alternative has to be made available to allow emergency calls.

•High voltage. Never open the product or attempt any repair.

•Keep the product away from liquid.

•Never use any battery type other than the one supplied. There is a risk of explosion if the batteries are replaced by an incorrect type.

•When the phone is ringing avoid holding the earpiece too close to your ear as it may damage your hearing.

•Do not use the product in places where there are explosive hazards.

4 Important