Philips VRX442, VRX462 warranty Playing, Read and follow the steps below to play a tape

30 Playing

Read and follow the steps below to play a tape.

1

Turn on the TV and set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape in the VCR. The power will come on. The VCR will place itself in VCR position automatically (the VCR light will appear on the display panel of the VCR). If the VCR light does not appear, press the VCR/TV button once. If the tape’s record tab has been removed, playback will start automatically.

3

If playback does not start automatically, press the PLAY button. The PLAY light will appear on the VCR display panel.

4

Press the STOP button on the remote control or the STOP/EJECT button on the VCR once to stop playback.

5

Press the REW(ind) button to rewind the tape.

6

When the tape has finished rewinding, press the EJECT button on the remote control or the STOP/EJECT button on the VCR again to remove the tape.

1 Turn on the TV.

2 Insert a tape.

	CBL/DSS	VCR	TV
6	EJECT	POWER	MUTE
	VOL	F.ADV	CHANNEL
	PAUSE/STILL
		PLAY		3
5	REW		FF
	VCR PLUS+			4
	/ENTER	STOP	LIGHT
	EXIT/STATUS MENU		CLEAR

1 2 3

4 5 6

7 8 9

100 0 GO-TO

REC/OTR	INDEX	MEMORY
	...
	...
	VAR. SLOW	TRACKING SKIP
SPEED VCR/TV SLOW		SEARCH

REMOTE LOCATOR

Helpful Hint

•Playback options and features are discussed on pages 49 - 57.