16 Setting the Clock (cont’d)
Manual PBS Channel Selection
1
Press the VCR button, then press the MENU button.
2
Press the Number 5 button to select SET CLOCK. CABLE BOX USERS SET CLOCK MANUALLY will appear
SET CLOCK
1 AUTO CLOCK (ON)
2 DAYLIGHT SAV TIME (ON)
3SET MANUAL CLOCK (OFF)
4SET TIME ZONE
(AUTO)
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
3
If (ON) appears to the right of AUTO CLOCK, press the Number 1 button twice. If (OFF) appears to the right of AUTO CLOCK, press the Number 1 button once.
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
1SET PBS CH. AUTO
2SET PBS CH. MANUAL
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
4
Press the Number 2 button to select SET PBS CH. MAN- UAL to tell the VCR the PBS channel from which to take the time.
5
Use the Number buttons to enter your PBS channel num- ber. (If you make a mistake, press the CLEAR button.) Finally, press the EXIT/STATUS button.
6
The Time Zone Selection menu will appear. Press one Number button to enter the
7
Press the EXIT/STATUS button. You will be prompted to turn off the VCR.
Press the EXIT/STATUS button again, then press the POWER button to turn off the VCR. Auto will flash in the display panel until the clock is set. Leave the VCR power off until the clock is set.
| CBL/DSS | VCR | TV | 1 |
7 | EJECT | POWER | MUTE |
|
VOL | F.ADV | CHANNEL |
| |
|
|
|
| |
| PAUSE/STILL |
|
| |
|
| PLAY |
|
|
| REW |
| FF |
|
| VCR PLUS+ |
| LIGHT |
|
| /ENTER |
|
| |
|
| STOP |
|
|
5 EXIT/STATUS MENU | CLEAR | 4 | ||
3 | 1 | 2 | 3 | |
4 | 5 | 6 | 2 | |
| 7 | 8 | 9 | |
| 100 | 0 | 6 | |
| REC/OTR | INDEX | MEMORY | |
... |
|
... |
|
VAR. SLOW | TRACKING SKIP |
SPEED VCR/TV SLOW | SEARCH |
REMOTE LOCATOR
Helpful Hints
•The time will be updated at the top of each hour (except at 11 p.m., midnight, 1 a.m. and 2 a.m.).
•To see the time on the display panel, press the EXIT/STATUS but- ton repeatedly.
•If -
Repeat steps 1 - 7 above, entering a different PBS channel at step 5. Or, set the clock following the steps
on page 17.
