Philips VRX462, VRX442 warranty Press the Menu button. The menu shown below will appear

Turning on Your VCR (cont’d) 11

6

Press the MENU button. The menu shown below will appear.

CONNECT ANTENNA OR CABLE

TO VCR

THEN…

PUSH CH UP KEY

OR…

FOR PLAY ONLY – PUSH STOP

7

Press the CHANNEL Up button to begin automatic channel programming. AUTO SET PROCEEDING/PLEASE WAIT will appear on-screen. The VCR will place all of the channels you receive into its memory, so when you scan through channels using the CHANNEL Up/Down buttons, you’ll only scan through chan- nels that you receive.

8

When channels are programmed, AUTO SET COMPLETED will appear on-screen briefly.

Then, the following menu will appear, giving you the option to set up the VCR Plus+ Programming System now, if you prefer.

VCR PLUS+ USER

TO SET UP VCR PLUS+

CROSS REFERENCE CHANNEL

MAP, REFER TO

INSTRUCTION BOOK.

PUSH MENU TO SET REF MAP

OR...

TO END PUSH EXIT

8 Wait for the VCR to program channels.

CBL/DSS VCR TV

EJECT POWER MUTE

	VOL	F.ADV	CHANNEL	7
		PAUSE/STILL
		PLAY
	REW		FF
	VCR PLUS+		LIGHT
	/ENTER
		STOP
9 EXIT/STATUS MENU			CLEAR
6	1	2	3
	4	5	6
	7	8	9
	100	0	GO-TO

REC/OTR INDEX MEMORY

9

If you do not want to set up the VCR Plus+ Programming System now, press the EXIT/STATUS button. You may set up the VCR Plus+ Programming System later by following the instructions on pages 38 - 39.

If you do want to set up the VCR Plus+ Programming System now, press the MENU button. Follow the instruc- tions from step 6 on page 39 to complete this task.

...
...
VAR. SLOW	TRACKING SKIP
SPEED VCR/TV SLOW	SEARCH

REMOTE LOCATOR

Helpful Hint

•You may not be able to program channels at step 7 if you are using a Cable Box or DSS Receiver.