Rerecording (Tape Duplication) 47
The instructions on this page show you how to copy tapes. The illustration uses two VRX462 VCRs. Different VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1 - 6.
VCR 1 | VCR 2 | 3) Use an RF coaxial cable to connect the RF OUT |
Playing VCR | Recording VCR | Jack on VCR 2 to the TV’s ANTENNA IN Jack. |
CABLE | IN | OUT |
|
BOX | ANT.IN | ||
|
| R |
|
AUDIO |
|
|
|
|
| L |
|
VIDEO |
|
| RF OUT |
|
|
| |
CH3 CH4 |
|
|
|
1)Use audio cables to con- nect the AUDIO OUT Jacks on VCR 1 to the AUDIO IN Jacks on VCR 2.
CABLE | IN OUT ANT.IN |
BOX | |
| R |
AUDIO |
|
| L |
VIDEO | RF OUT |
| |
CH3 CH4 |
|
audio cables | 2) Use a video cable to | |
| ||
| connect the VIDEO OUT | |
video cable | Jack on VCR 1 to the | |
VIDEO IN Jack on VCR 2. | ||
|
1
VCR 1 will play your tape. Insert a prerecorded tape in VCR
1.If the tape does not have a record tab, playback begins. If this happens, press the STOP/EJECT button on VCR 1 once.
2
VCR 2 will record your tape. Insert a blank tape in VCR 2.
Make sure the VCR power is on and the VCR is in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.)
3
Turn on the TV; set it to channel 3 or 4, whichever channel the CH3/CH4 switch on VCR 2 is set to.
4
Point the remote control at VCR 2. Press the VCR but- ton, then press the Number buttons 0, 0. L will appear on the display panel. (To record from the Front VIDEO/AUDIO IN Jacks, press the MENU button. Press the Number 4 button to select INPUT SELECT, then press the Number 3 button to select A/V IN FRONT. Press the EXIT/STATUS button.)
5
Point the remote control at VCR 2. Use the (Tape) SPEED button to select SP or SLP.
6
Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time. The REC(ord) light will appear on the VCR 2 display panel.
Helpful Hints
•Unauthorized recording of copyright- ed television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.
•To record from the VIDEO/AUDIO IN Jacks on the back of the VCR at step 4, press the MENU button.
Press the Number 4 button to select INPUT SELECT, then press the Number 2 button to select A/V IN REAR. Press the EXIT/STATUS but- ton.
•Audio and video cables are not included.
•The VCR in the figure above is the VRX462. If you have the VRX442, use a
1 to the AUDIO IN Jack on VCR 2.
•To stop copying tapes, press the STOP/EJECT button on VCR 2, then press the STOP/EJECT button on VCR 1.
