CONNECTIONS (CONTD)

STEP TWO: CONNECTING THE SET TOP BOX TO YOUR TV AND/OR VCR

Choose the STEP TWO diagram that matches the cables you prefer.

USING COAXIAL CABLE

(TV ONLY, NO VCR)

Connect one end of the sup- plied coaxial cable to the RF OUT jack on the back of the Set Top Box.

Connect the other end of the coaxial cable to the TV’s ANTENNA IN or RF IN jack.

USING COAXIAL CABLE

(TV AND VCR)

Connect one end of the sup- plied coaxial cable to the RF OUT jack on the back of the Set Top Box.

Connect the other end of the coaxial cable to the VCR’s ANTENNA IN or RF IN jack.

Connect a second coaxial cable (not supplied) to the ANTENNA OUT or RF OUT jack of the VCR and to the ANTENNA IN or RF IN jack of the TV.

SMART HELP

 

If you have an older model TV and there is no

 

place to plug in a coaxial cable, use a balun or

 

matching transformer (300 ohm to 75 ohm) obtainable

 

at an electronics store. Connect the coaxial cable to

 

the transformer and connect the transformer to the

 

VHF antenna screws on the TV. Set the TV to channel

example of

3 and use the Set Top Box remote control to change

channels.

transformer

 

12

Page 12
Image 12
Philips WVH111 user manual Connections CONT’D, TV ONLY, no VCR