Upgrading The Computer
4. The RAM module 8 (see Figure 6 - 5) will
Figure 6 - 5
RAM Modules
Released
8 | 8 |
6
5.Pull the latches to release the second module if necessary.
6.Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
7.The module’s pin alignment will allow it to only fit one way. Make sure the module is seated as far into the slot as it will go. DO NOT FORCE the module; it should fit without much pressure.
8.Press the module in and down towards the mainboard until the slot levers click into place to secure the module.
9.Replace the memory socket cover and the 5 screws (see Figure 6 - 4).
10.Restart the computer to allow the BIOS will register the new memory configuration as it starts up.
Upgrading the System Memory (RAM) 6 - 7
