Phoenix Gold pmn manual USB 2.0/1.1 Ports, PC Card Slot, USB 2.0 Support in Windows XP

Introduction 1

2 * USB 2.0/1.1 Ports

These USB 2.0 compatible ports (USB 2.0 is fully USB 1.1 compliant) are for low-speed peripherals such as keyboards, mice or scanners, and for high- speed peripherals such as external HDDs, digital video cameras or high-speed scanners etc. Devices can be plugged into the computer, and unplugged from the computer, without the need to turn the system off (if the power rating of your USB device is 500mA or above, make sure you use the power supply which comes with the device).



USB 2.0 Support in Windows XP

Make sure you install Windows XP Service Pack 2 (or are installing a Windows

XP version which includes Service Pack 2) before installing any drivers. Service

Pack 2 includes support for USB 2.0.

PC Card Slot

The 3.3V/5V slot may be used for a Type-II PC Card (PC Cards were also pre- viously referred to as PCMCIA) and fully supports Cardbus. Refer to “PC Card Slot” on page 2 - 11 for more information.

Left Side View 1 - 15