Phoenix Gold pmn manual Display Devices & Display Modes, Single Display, Clone Mode, Dualview Mode

Advanced Controls



3 Display Wizard

Use the Display Wiz- ard in the Desktop Management window to quickly setup and configure any attached displays (see Figure 3 - 5 on page 3 - 7).



Cyberlink Power

DVD

Do not switch display modes (e.g. from Du- alview to Clone etc.) when playing DVDs in the Cyberlink Power DVD 6 program. Set the display mode be- fore launching the pro- gram.

Display Devices & Display Modes

Besides the built-in LCD, you can also use an external monitor/flat panel dis- play or TV as your display device. The display devices and options are as fol- lows:

1.The notebook’s built-in LCD.

2.An external monitor connected to the external monitor port.

3.A TV connected to the S-Video-Out Port.

Single Display

Only one of your displays is used.

Clone Mode

Clone Mode simply shows an exact copy of the Primary display desktop on the other display(s). This mode will drive multiple displays with the same con- tent and each display device can be configured independently.

Dualview Mode

Dualview Mode treats both connected displays as separate devices, and they act as a virtual desktop resulting in a large workspace. When Dualview is en- abled, you can drag any icons or windows across to the other display desktop. It is therefore possible to have one program visible in one of the displays, and a different program visible in the other display.

3 - 8 Display Devices & Display Modes