CONNECTIONS

MANIPULATOR STYLE CONNECTIONS

These connections should be used when you wish to operate the accessory DJS or other DJ software without connecting the drive unit. Use the accessory USB auxiliary power cable and the normal USB cable to connect the control unit to the computer (connect the USB auxiliary power cable first).

Accessory USB cable

Accessory USB auxiliary

power cable. Computer

 

Control unit

PC

 

5V

 

MONITOR OUT

REMOTE

 

CONTROL

Audio interface (sold separately)

Audio cable

Mixer

NOTE

Do not connect until you have installed the required driver in your computer. See “ABOUT THE DRIVER PROGRAM” (P.49).

•When making manipulator style connections, do not connect the drive unit, since it will not function correctly.

•Do not connect anything to the 5 V connector other than the accessory USB auxiliary power cable.

•Always use the accessory USB auxiliary power cable and USB cable only.

•Always connect the accessory USB auxiliary power cable and USB cable to one and the same computer.

•Do not connect this unit to a computer through a USB hub.

•Do not connect this unit to a computer through a CardBus-supported USB interface card.

18

En