PARTS AND THEIR FUNCTIONS

Center Display

3 1 2

1Main menu display

The center display’s menus are changed by using the BROWSE button, MIX button, EFFECT button, and UTILITY button. The function buttons, select up ()/down() buttons, LOAD A/B buttons, and the rotary selector dial are used to manipulate the contents of each menu.

BROWSE screen

Use to select tracks and construct playlists (P. 26).

MIX screen

Use to perform mixing operations, including auto mix using playlists (P. 42).

EFFECT screen

Use to select scratch play and various effects used in jog break play (P. 39).

UTILITY screen

Use to make unit settings (P. 60).

2Function tab

Displays items that can be changed using the six function buttons. Items displayed differ depending on the contents shown on the main menu display.

3A/B track information display

Displays track information and current status for tracks playing on controller A/B.

Track name

Play status

Artist name

Play status

Indicates track is currently playing.

Indicates track is currently paused.

Indicates track is currently in cue standby condition (see P. 36 “SETTING CUE POINTS”).

MEMO

•Track name and artist name can be displayed in Western European languages, Russian, Chinese (simplified

Mandarin), and Japanese.

Display A/Display B

 

 

 

 

 

 

 

 

 

 

 

9

5

 

3

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

6

 

 

 

 

7

 

 

 

 

 

 

 

 

 

 

 

1Track number display

Displays the number of the track currently playing.

2TEMPO control range display (±6, ±10, ±16, WIDE)

Displays the selected variable range mode of the TEMPO adjust slider.

3TEMPO change ratio display

Displays the change in tempo produced by the operation of the TEMPO adjust slider.

4A.CUE indicator

Lights when the Auto Cue function is ON.

5Time display

Displays the current track’s elapsed time ([REMAIN] indicator is off), or remaining time ([REMAIN] indicator is lighted), in minutes [M], seconds [S], and frames [F].

6Playing address display

To provide a quick intuitive grasp of the relative progress of a track’s playback (either elapsed time or remaining time), a bar graph is used to represent the full length of the track.

•Elapsed time display: Starts with all segments off, then gradually lights from left to right.

•Remaining time display: Starts with all segments on, then gradually goes off from left to right.

•When 30 seconds of remaining playing time is reached, the graph begins to flash slowly.

•When 15 seconds of remaining playing time is reached, the graph begins to flash quickly.

7BPM display

Shows the currently playing track’s BPM (Beats Per Minute)

8MEMO indicator

Lights when a cue or loop point has been stored in memory.

9REMAIN indicator

Lights when the time display is set for remaining time.

English

21

En