START PLAYBACK (Using normal connections)

Changing the playlist’s track order

1Select the track you wish to move from the playlist.

2Press the rotary selector dial.

•A menu will appear in the right window.

3Turn the rotary selector dial to select [MOVE TRACK], then press the rotary selector dial.

•A yellow line will be displayed.

4Turn the rotary selector dial to the place you wish to move the track.

5Press the rotary selector dial.

•The track selected in step 1 will be moved to before the track selected in step 4, and the display will return to the playlist.

To delete tracks from a playlist

1Select the track you wish to delete from the playlist.

2Press the rotary selector dial.

•A menu will appear in the right window.

3Turn the rotary selector dial to select [DELETE TRACK], then press the rotary selector dial.

•The track will be deleted from the playlist.

•A track cannot be deleted when it is set in the controller.

Editing the name of a playlist

1 Select the desired playlist

2Hold the rotary selector dial depressed for one second or more.

•A menu will appear on the right side of the center display.

3Use the rotary selector dial to select [RENAME], then press the rotary selector dial.

4Enters edit mode. Use the rotary selector dial to edit the name of the playlist.

•A maximum of 32 characters can be input.

Select up () button:

Delete previous character to cursor. Select down () button:

Inputs same character as last input, and moves to next input position.

Press rotary selector dial:

Save edited contents and leave editing mode. Rotate rotary selector dial:

Select character type: Upper case  lower case  numerals  symbols

5 When editing is completed, press the rotary selector dial.

English

To close a playlist

1 When a playlist is open, press the select up () button.

To delete a playlist

All tracks recorded in the playlist will be deleted from the playlist.

1Select the name of the playlist.

2Hold the rotary selector dial depressed for one second or more.

The [CANCEL], [RENAME], [ALL TRACK CLEAR] menu will appear.

3Turn the rotary selector dial and select [ALL TRACK CLEAR].

4Press the rotary selector dial.

All tracks recorded in the playlist will be deleted from the playlist (the playlist will be empty).

•A track set in the controller cannot be deleted from the playlist.

• The playlist will flash, indicating that editing is completed.

MEMO

•Two-byte characters are not supported.

•For information on using a keyboard for editing, see the section “TRACK SELECTION WITH A USB KEYBOARD” (P. 30).

Saving a playlist

Whenever tracks are recorded, erased, or edited in a playlist, the new playlist is automatically saved (saving occurs about five seconds after an editing operation is performed, assuming no further command input).

NOTE

•If the unit’s power is turned off immediate (within five seconds) after editing a playlist, the results of the edit may not be reflected properly.

33

En